Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > Do It Yourself

 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01/10/2008, 01:49 AM
Doc_Polit Doc_Polit is offline
Registered Member
 
Join Date: Mar 2005
Location: Red Deer, Alberta, Canada
Posts: 6
Filling the Holes??

I have a large tank (225 gallon) with dual overflows in the rear corners. The drain holes are, I believe, 2" and are drilled in the bottom pane.

I have no intention of using the overflow/sump system at this time. I plan to remove the overflow partitions in order to maximize tank space. However, I do have plans to use the overflows sometime in the future.

That being said, what do you suggest to cap the holes? Would threaded pipe plugs in the bulkheads withstand the water pressure?

Any suggestions are greatly appreciated. Thx!
__________________
Support bacteria.......it is the only culture some people have.
  #2  
Old 01/10/2008, 02:34 AM
itZme itZme is offline
T5 Reefer
 
Join Date: Sep 2005
Location: West Salem, OH
Posts: 1,552
I have used pipe plugs with teflon tape for this purpose and have had no trouble but I would strongly caution against removing the overflows. If you are setting up a reef tank and have no plans for a sump or refugium at this time just don't hook anything to the bulkheads but you will most likely be glad you have them in a few months when you have some sort of trouble like increased phosphates or you would like to get the heaters and probes out of the display tank by adding a simple sump/fuge system.

Most people get into the hobby by buying a non-drilled tank and then wish they had one that was drilled and have to build their own overflows. You have the opposite problem but, in my opinion, you should just hold off for a while before removing them.
__________________
It doesn't make a difference what temperature a room is, it's always room temperature. ~ Steven Wright
  #3  
Old 01/10/2008, 10:51 AM
kgross kgross is offline
Can't be listed on **
 
Join Date: Nov 1999
Location: Nampa, ID
Posts: 2,343
If you want to use the holes in the future. Threaded plugs, or if you want to be able to use them without draining the tank. Do a valve. Then you can just hook up whatever you want and open the valve.

Kim
__________________
America will only be the Land of the Free as long as it is the Home of the Brave.
  #4  
Old 01/10/2008, 12:41 PM
jh2pizza jh2pizza is offline
Registered Member
 
Join Date: Feb 2003
Location: zanesville, ohio
Posts: 1,501
threaded bulk head with a plug.
__________________
Joe and Jeni

Just when you think you have made it Idiot proof, they just build a better Idiot.
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 09:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central Reef Central, LLC. Copyright 1999-2009