Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > Do It Yourself

 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12/31/2006, 09:20 AM
quads4_life quads4_life is offline
Registered Member
 
Join Date: Mar 2006
Posts: 66
I have built my own sump of a design from Melvsreef but as for my plumbing.....Well this is what I have now




  #2  
Old 12/31/2006, 09:21 AM
quads4_life quads4_life is offline
Registered Member
 
Join Date: Mar 2006
Posts: 66
With this setup I really cant control the flow going into the fuge with out over loading the other side. So I was wondering if I put a T and directed it to the other side If it will work and still be able to control the flow going into the fuge. Like this

  #3  
Old 12/31/2006, 09:29 AM
30mini 30mini is offline
Got frags?
 
Join Date: Feb 2006
Location: Cincinnati, Oh
Posts: 9,764
Send a message via AIM to 30mini
That's exactly what you want to do if you want less flow in the fuge! But a ballvalve right where you have it, and close it just enough to get the desired flow, and the rest will be directed to the other side!
__________________
Now, thats a deal!!!
  #4  
Old 12/31/2006, 09:32 AM
thatguy thatguy is offline
Registered Member
 
Join Date: Mar 2006
Location: Collinsville, IL
Posts: 452
That diagram looks like it would work. However, looking at the picture of your current plumbing, how would you add the T? It doesn't look like you have the room available to put the T in.

Nice work btw.
__________________
#something witty
  #5  
Old 12/31/2006, 10:20 AM
quads4_life quads4_life is offline
Registered Member
 
Join Date: Mar 2006
Posts: 66
There's always room. lol
here is the new setup


  #6  
Old 12/31/2006, 10:21 AM
quads4_life quads4_life is offline
Registered Member
 
Join Date: Mar 2006
Posts: 66
I am just unsure weather to cut slots or drill holes in the drain going to the skimmer or just leave it where it drains in to the bottom of the chamber in to the grate
  #7  
Old 12/31/2006, 11:09 AM
quads4_life quads4_life is offline
Registered Member
 
Join Date: Mar 2006
Posts: 66
ok new design on drain into skimmer

  #8  
Old 12/31/2006, 12:20 PM
nynex nynex is offline
Registered Member
 
Join Date: Oct 2006
Posts: 129
That should work fine. Nice Setup!
  #9  
Old 12/31/2006, 12:45 PM
StephNewman StephNewman is offline
Registered Member
 
Join Date: Dec 2005
Location: Arnold, Mo
Posts: 529
I plan on doing the same design for my sump. I have a 48" x 12" X 17" high sump. I am using an octopus nw-200 skimmer. How high should I make the baffles. I can't find anything showing water limit of the skimmer.
  #10  
Old 12/31/2006, 12:47 PM
StephNewman StephNewman is offline
Registered Member
 
Join Date: Dec 2005
Location: Arnold, Mo
Posts: 529
Quads- is that acrylic or glass bafflefor the fuge side? How did you put slits in it?
  #11  
Old 12/31/2006, 12:54 PM
quads4_life quads4_life is offline
Registered Member
 
Join Date: Mar 2006
Posts: 66
Quote:
Originally posted by StephNewman
Quads- is that acrylic or glass bafflefor the fuge side? How did you put slits in it?
It is Acrylic (Lexan), I just used a drill to drill the holes 1" apart then I took my dremel with a small grinding stond and pulled them to the edge. Just go slow on drilling and grinding because if the drill catches it will crack the acrylic. Also before you silicone it into place make sure you use a very abrasive sandeing drum on your dremel or 40 grit sandpaper and rough up the edges of the acrylic other wise the silicone wont stick very good.
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:11 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central Reef Central, LLC. Copyright 1999-2009