View Single Post
Old 01/09/2008, 09:58 PM   #13
Registered Member
not_sponsored's Avatar
Join Date: May 2007
Location: Hiding
Posts: 341
If you're pumping 1200 gph in the pipe, the difference between a 1.5" pipe and a 3" pipe is 2.5 feet of head per 100 feet of pipe. In this case you'll be working with less than 10 feet of pipe or .25 feet less head by switching from a 1.5" pipe to a 3" pipe, TWICE THE DIAMETER.

On the other hand, lets say we have 5 90 degree fittings, for 1.5" pipe that would add 4 feet of head for every 90, or 20 feet of head.

Using 3" pipe we would add 7.9 feet of head for every 90 or 39.5 feet of head.

This is a difference of 19.5 feet for the different sized pipes, for MINOR head loss. Compare this with the .25 feet of head loss caused by decreasing the pipe size in MAJOR head loss.

not_sponsored is offline   Reply With Quote