View Single Post
Old 01/09/2008, 09:59 PM   #14
kgross
Premium Member
 
kgross's Avatar
 
Join Date: Nov 1999
Location: Nampa, ID
Posts: 5,870
Use the science... Here are numbers that you can duplicate using the RC head loss calculator.

We will use a mag 12.5 pump, with 4 feet vertical head, 3 feet horizontal, and 5 elbows.

One with 3/4 inch pipe
One with 1 inch Pipe
one with 1 1/4 pipe

Then we will run the same numbers but we will use your 3/4 inch spa flex and say that there are no elbows at all and the same with 1 inch.

3/4 pipe with elbows
Total losses are 9.11 feet of head pressure, or 3.94 PSI. with a flow rate of 681 GPH. Process took 43 iterations.

1 inch pipe with elbows
Total losses are 6.82 feet of head pressure, or 2.95 PSI. with a flow rate of 891 GPH. Process took 103 iterations.

1 1/4 pipe with elbows
Total losses are 5.15 feet of head pressure, or 2.23 PSI. with a flow rate of 1017 GPH. Process took 142 iterations.

Now your version with no elbows, should have more flow than larger pipe correct?

3/4 no elbows or other fittings just 7 feet of pipe
Total losses are 7.68 feet of head pressure, or 3.32 PSI. with a flow rate of 816 GPH. Process took 79 iterations. hmm, less than 1 inch with 5 elbows

1 inch with no elbows
Total losses are 5.76 feet of head pressure, or 2.49 PSI. with a flow rate of 974 GPH. Process took 125 iterations. Hmm less than 1 1/4 with 5 elbows

Total losses are 4.61 feet of head pressure, or 1.99 PSI. with a flow rate of 1052 GPH. Process took 155 iterations.

So yes better turns will increase flow, but if you put in larger pipe it makes more of a difference than any type of elbow that you use.

Kim


__________________
Proud Member of the Idaho Marine Aquarium Society

America will only be the Land of the Free as long as it is the Home of the Brave.

Current Tank Info: AGA 180gallon tank, VHO/MH lighting, DSB, calcium reactor, Also a 7 Gallon Nano softy tank, and a 32 gallon cube
kgross is offline   Reply With Quote