Reef Central Online Community
Tunze USA

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > General Interest Forums > The Reef Chemistry Forum
Register Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Old 01/11/2008, 11:37 AM   #1
janderson8
Moved On
 
janderson8's Avatar
 
Join Date: Jun 2005
Location: Oklahoma
Posts: 949
geo calcium reactor and 180 SPS

just get to hooking you the geo 624 last night. Set my PH to 6.5 and my bubble rate was 30 per min. The efulint drip rate was 60 per min. This morn it looked like club soda in the reactor.

Can all you experts chime in and let me know how yours is runing? Thanks


janderson8 is offline   Reply With Quote
Old 01/11/2008, 11:55 AM   #2
CleveYank
20 Years and Over
 
CleveYank's Avatar
 
Join Date: Feb 2000
Posts: 3,052
When dialing in a Ca reactor.

You want to test the effluent for pH value to match your setting on your pH controller. (verify the value)
If 6.5 is your setting then it should test there.

At the same time you want to make sure that as you add or subtract CO2 bubble to your desired number to reach your target Ca and Alk level, that you are making sure that the pH of the tank is not being depressed by the CO2 bubble and the effluent output of the reactor. Keeping it no lower than 8.0 or higher than 8.6 with the 8.3 to 8.4 being the sweetspot so to speak.

******
Some folks in order to reach their target Ca and Alk levels have had to drip the effluent into their skimmer, into a refugium, or have a kalk reactor to blow of the CO2, have it absorbed by algae in the refugium, or use the high pH of Kalk drip offsetting the CO2 reaching the main tank. ----------I think the most common is having a dual chamber unit for this issue. Stage one is in your case gets a 6.5 pH and Stage 2 or the second chamber helps absorb the rest of the CO2 in the effluent so that pH depression in the tank is avoided. Every setup and flow and amount of Ca/Alk you need varies. So it's really pretty much a tailored thing. 30/min bubble rate for your 180 might be too little for the 180 tank of the next guy that has 12 inch diameter plate corals and 10 or 12 clams.

Using a B-ionic or 2 part to help get the tank at the levels you want and having the reactor maintain those is usually easier than walking the values up with the reactor.

The key to any of this especially if you have a wonderful SPS livestock now is to test and test and test and like anything else...slow adjustments.

Hope that helped clear up the bubbles...



Last edited by CleveYank; 01/11/2008 at 12:02 PM.
CleveYank is offline   Reply With Quote
Old 01/11/2008, 12:24 PM   #3
janderson8
Moved On
 
janderson8's Avatar
 
Join Date: Jun 2005
Location: Oklahoma
Posts: 949
thanks I think I get all that but how do you keep the ph of the reactor at 6.5 with out it looking like club soda. My understanding is there should not be a lot of bubbles in the water. Is this not correct?


janderson8 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 12:33 AM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2021 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.